Through its diverse selection of self-expanding stents for the respiratory tracts, MICRO-TECH can provide the right solution for every indication. All in all, six different diameters ranging from 10 to 20 mm in addition to six different lengths varying from 20 to 80 mm are available. The stent’s spherical ends as well as their high radial force ensure a firm hold and minimize the risk of migration.
TRACHEAL AND BRONCHIAL STENTS
THE RIGHT SOLUTION FOR EVERY INDICATION
- Nitinol mesh with atraumatic ends
- Excellent positional stability
- High radial force
- Resistant and elastic covering
- Fully covered stents available
- High radiopacity
- Guide wire-compatible up to 0.035 inches
SUCCESSFUL IN PRACTICAL USE
The MICRO-TECH’s standard stent ends guarantee utmost reliability when bypassing stenoses and leakages in the respiratory tract. Combined with their high radial force, these distinctive spherical ends, which measure just 2.5 mm, guarantee excellent positional stability. The radiological image, acquired at a water depth of 10 cm, demonstrates the excellent radiopacity of the stent.
View into the released tracheal stent
Test image of radiopacity
Position monitoring with X-ray
COVERING ACCORDING TO REQUIREMENTS
The stents are completely or partially covered according to requirements. The covering is particularly resistant and elastic.
SIX DIFFERENT DIAMETERS
With a total of six different diameters, the stent size can be precisely adapted to the patient’s anatomy. This ensures maximum hold and wearing comfort.
FOR LONG AND SHORT BYPASSES
A selection of six different lengths is available varying from 20 to 80 mm, guaranteeing the right solution is always at hand for every intervention.
EASILY MANEUVERABLE INTRODUCER
Each stent is preloaded on an easy-to-maneuver introducer which guarantees rapid and precise stent release. If the stent has been placed too deep, it can still be repositioned at the desired point in the oral direction during release.